Go to Device Manager (right click on My Computer, choose Manage and then find Device Manager in the left panel), or right click on Start Menu for Windows 10 and select Device Manager 3. Right click on the hardware device you wish to update and choose Update Driver Software 4. Freescale/NXP I.MX Chip image deploy tools. Original linux version uses 'linux' branch, windows version uses 'windows' branch. Uuu (universal update utility) for nxp imx chips - libuuu-1.0.1-gffd9837 Succeded:0 Failed:3 Wait for Known USB Devices to Appear.
- Nxp Port Devices Driver Download For Windows 8
- Nxp Port Devices Driver Download For Windows 7
- NXP Port Devices Driver Download For Windows
- Nxp Port Devices Driver Download For Windows 10
Install Drivers for NXP FRDM-KL25ZBoard
Nxp Port Devices Driver Download For Windows 8
The NXP™ FRDM-KL25Z boardhas an open standard embedded serial and debug adapter called OpenSDA.This adapter bridges the serial and debug communications between aUSB host computer and an embedded target processor.
Kodak film scanner. Before you use the NXP FRDM-KL25Z board with the host computer, install the OpenSDA USB drivers.
To install the OpenSDA USB driver:
Nxp Port Devices Driver Download For Windows 7
Download and Install the P&E OpenSDA USB Drivers from the site https://www.pemicro.com/opensda/.
Make sure that you have the latest bootloader and the OpenSDA firmware on your board. To get the latest firmware, refer to the section, Get the Latest Bootloader and the Firmware.
Connect a USB cable from your computer to the OpenSDAmini-B USB connector.
The board appears as a removable storage drive with a volumelabel FRDM-KL25Z.
NXP Port Devices Driver Download For Windows
The MSD Flash Programmer also includes a USB virtualserial port, which requires an .INF file for installation in Windowsplatform. The .INF file is available in the P&E OpenSDA USB Drivers(Step 1) and also on the FRDM-KL25Z removable drive.
To install the USB virtual serial port driver:
Nxp Port Devices Driver Download For Windows 10
Open Start menu > Control Panel >Device Manager.
Go to ports and check if 'OpenSDA - CDC Serial Port'is available. The driver installation is complete if OpenSDA –CDC exists. Otherwise, you should see 'PEMicro/Freescale - CDC SerialPort' under 'other devices' as shown below.
Right click on 'PEMicro/Freescale - CDC Serial Port'and select Update Driver Software.
In the Update Driver Software dialog box, select Browsemy computer for driver software. The driver is availablein the P&E OpenSDA driver package that you have installed as wellas on the FRDM-KL25Z removable drive.
Point to either location to locate the USB virtualserial driver.
Click to complete theinstallation.
After you install the driver, you will see the serial port forFRDM-KL25Z Board under Ports.